Paste Wax Over Tung Oil. i applied 4 coats of tung oil (the stuff thinned with mineral spirits, not 100% pure) to a small cherry table top, allowing 24. scraping's the best way to remove wax. You can sand in between applications with 320x if it. the finish is coming out great, but my wife wants a more durable finish on the top. i found that to make a paste with pumice powder and linseed oil and use a chalk eraser after your final finish of finishing oil or. I had completed the top and buffed on a. if i want the feel of just oil, i either leave it, or put paste wax over it. Using solvents will drive the wax into the wood, oil or not. i would not recommend using briwax original on any new finish. Its solvent is toluene which will react with oil based. hello peter gedrys, my question is can you go over the final coat of tung oil with paste wax. Since you state you have already applied 4 coats of tung oil and want it to feel natural, i.
from www.realmilkpaint.com
scraping's the best way to remove wax. i would not recommend using briwax original on any new finish. I had completed the top and buffed on a. i applied 4 coats of tung oil (the stuff thinned with mineral spirits, not 100% pure) to a small cherry table top, allowing 24. Since you state you have already applied 4 coats of tung oil and want it to feel natural, i. You can sand in between applications with 320x if it. Its solvent is toluene which will react with oil based. if i want the feel of just oil, i either leave it, or put paste wax over it. i found that to make a paste with pumice powder and linseed oil and use a chalk eraser after your final finish of finishing oil or. the finish is coming out great, but my wife wants a more durable finish on the top.
Tips On How to Apply Tung Oil Properly Real Milk Paint Co
Paste Wax Over Tung Oil I had completed the top and buffed on a. Using solvents will drive the wax into the wood, oil or not. i applied 4 coats of tung oil (the stuff thinned with mineral spirits, not 100% pure) to a small cherry table top, allowing 24. scraping's the best way to remove wax. i found that to make a paste with pumice powder and linseed oil and use a chalk eraser after your final finish of finishing oil or. Since you state you have already applied 4 coats of tung oil and want it to feel natural, i. You can sand in between applications with 320x if it. i would not recommend using briwax original on any new finish. I had completed the top and buffed on a. if i want the feel of just oil, i either leave it, or put paste wax over it. hello peter gedrys, my question is can you go over the final coat of tung oil with paste wax. Its solvent is toluene which will react with oil based. the finish is coming out great, but my wife wants a more durable finish on the top.
